The problem: instrument results retyped into every trial
Gloss readings often come off the meter as one file and get copied by hand into each trial, then copied again into a spreadsheet to check against spec and chart.
One gloss meter file covers four trials, but someone has to split it up, type each value into its trial and then rebuild the data in a spreadsheet to compare with the spec.
What this demo shows
- Load one gloss meter file that covers four primer trials.
- Check each reading against the spec.
- Chart the results, with no retyping.
Why it matters
Every manual copy is a chance for an error. Loading one file to fill readings for several trials, checked against spec as they land, removes those copies.
Results feed charts directly, so the team sees how trials compare without exporting anything.
See it with your own data
This video is part of LIMS for R&D. To see how it would work with your own formulations and records, request a demo. Our team replies within 30 minutes during business hours.
Read the transcript
Will your scientists have to enter data twice? Not with Uncountable. Uncountable keeps your experiments and test results in one structured system. Here, four primer trials wait for their gloss readings. Drop in the gloss meter file and every reading fills in. No retyping, no copy and paste. Each reading is checked against the spec as it lands.
Trial three misses its gloss target. The same results feed your charts, so the trial that missed stands out at once. Enter it once, use it everywhere.
